hello,welcome to SHENZHEN MING HONG JING MI DAO MO CO.,LTD !

SHENZHEN MING HONG JING MI DAO MO CO.,LTD

13 years precision die cutting die cutter manufacturers

Continuously provide customers with satisfactory products

HotLine
15989507528
Position:Home > Product > Etch cutter die
Etch knife die MH268220
  • Etch knife die MH268220

  • Category:Etch cutter die

  • Product Desc:

    The finished product has few restrictions in shape design, and can be used for finished products with complex shape. The blade is smooth with no need to adjust the knife edge. The same set of knife dies can be combined with different high and low knives. It has no joints, smooth section lines, and shorter mold adjustment time. The size accuracy is + 0.03MM, which is suitable for precision cutting. The minimum distance between blade and blade can be 0.5MM. The surface of the blade must be treated with special treatment

  • Totline:0755-33938718
Detail:

  Product Description:

  The main characteristics of the mold are that the mold has no knife edge, the mould precision is high, the service life is higher than the laser die, and the product size is stable in the die cutting process.

  Mold maintenance process is simple, and long-term storage will not affect the product size.

  The blade angle and knife height can be designed according to the processing requirements of the products, and can be applied to the installation of QDC mould and various hardware mould bases。

  It is mainly used for processing products with high dimensional accuracy, high requirement for die cutting, and a certain amount of product processing.

  This kind of mold is produced in a normal way, which is more complex, with many cutter lines, small double cutting bits within 1.0MM, or multiple linear spacing less than 2MM.

  1。 the product shape design is limited, and it can be used for finished products with complex shape。

  The 2. knives are smooth, with no need to adjust the edges.

  3。 the same set of knife dies can be combined with different high and low knives (full break or half cut)。

  4. no seams at the edges, smooth sections and shorter die adjustment time.

  5. the dimension accuracy is + 0.03MM, which is suitable for precision cutting. The minimum distance between blade and blade can be 0.5MM.

  The surface of the 6。 blade must be treated with special treatment。

  This kind of mold is mainly used in the die cutting of double-sided adhesive, single side glue, dry glue, trademark, dust net, protective film, Mara, and less than 1 foam.


Online purchase:
Name:
*
Tel:
*
Email:
*
Content:
*
Code:
* 看不清楚?点击换张图片